Browse all practice questions for the Nautical Institute Dynamic Positioning (DP) Revalidation and CPD Program Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Nautical Institute Dynamic Positioning (DP) Revalidation and CPD Program Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which combination is suitable for supply operations during lifting activities in more than 350m depth?
  • What is one effective method to achieve redundancy in dynamic positioning systems?
  • During a dynamic positioning operation, how is the direction of thrust typically controlled?
  • Which method is preferred for selecting sensors in a DP system?
  • Which of the following best describes the role of a DP operator?
  • What issue can multipath cause in acoustic and satellite position sensing?
  • Under which conditions may positioning be improved by increasing 'Control Gain'?
  • What is the most probable reason for a sudden high increase in DP current Residual Force on a PSV alongside an installation?
  • What is the role of TCP in TCP/IP?
  • What is the consequence of not considering environmental conditions in dynamic positioning?
  • What is a major advantage of using a DP system in offshore operations?
  • To ensure reliability, what critical analysis should a DP operator conduct regularly?
  • How does a network transmit data?
  • What environmental factor is known to affect ultrasonic wind sensors significantly?
  • What should be included in the documentation for the ASOG development process?
  • What should the DPO do if the port main propeller fails to full ahead pitch during DP operations?
  • What type of incidents does an FMEA document typically aim to prevent?
  • What does the DP System use to calculate weighting (or confidence) for each Position Reference System?
  • Which of the following elements is NOT part of the seven major hardware elements in a DP system?
  • Why are the IP addresses of devices in a dynamic positioning system important?
  • What is a Responder Beacon in a Hydroacoustic Position Reference (HPR) System?
  • What is the Coanda effect associated with in DP systems?
  • How can the possibility of loss of Position and/or Heading be minimized?
  • What is the nominal accuracy of a modern Differential GPS (DGPS) system?
  • Can the drive of a DC thruster exhibit a zero or near-zero power factor?
  • Which fixed pitch thruster configuration would cause the least power load?
  • Which of the following systems is an example of a Local Positioning Reference System?
  • Why must a vessel remain in Auto Position mode for at least 30 minutes before commencing work?
  • Which dynamic positioning system feature enhances operational safety by increasing redundancy?
  • Why is selecting a 'preferred' Gyro important in DP operations with multiple Gyros?
  • What does thruster modulation refer to?
  • What aspect of the DP system ensures that the vessel can withstand the loss of a single component?
  • Differential correction for GNSS systems may be transmitted through which method?
  • Where is the best placement for an HPR system transponder beacon when possible?
  • For fixed pitch propellers, how does the design affect thrust at lower speeds?
  • Under what scenario should DP capability plots be recalculated?
  • What immediate action should be taken if a thruster shows a drop from 45% command to 20% feedback?
  • Which thrust is required to maintain vessel position against a ten-knot wind?
  • If a position discrepancy among three or more Position Reference Systems is detected, what test causes the DP system to reject the drifting PRS?
  • What is one disadvantage of using a DP system compared to anchoring?
  • What is the purpose of an initial stabilisation period where the vessel is on DP but does not participate in any industrial mission activity?
  • What is necessary to enable Auto heading in Joystick mode?
  • What should DP mobilisation trials demonstrate?
  • What does 'Follow Target Mode' typically require for optimal performance?
  • What can significantly affect acoustic transmission underwater?
  • How can Dynamic Positioning be defined?
  • Which class of DP vessels is required to have both thruster and power redundancy?
  • What is used to determine long baseline acoustic position?
  • Which Positioning Reference Systems (PRS) are capable of utilizing multiple targets?
  • Under what conditions should vessels operating in Equipment Class 2 or 3 terminate operations?
  • What is the purpose of "Prohibited azimuth zones" or "azimuth barring" with a single azimuth thruster?
  • What scenario can lead to consequence analysis not functioning correctly?
  • Which element of the DP system serves as the user interface for the Dynamic Positioning Operator (DPO)?
  • When should DP location set-up checks be conducted?
  • What is the purpose of a network hub or switch in a DP system?
  • What is the thrust per shaft horsepower produced by a fixed pitch variable speed thruster at half of rated thrust?
  • What does DGNSS primarily provide to a DP system?
  • What is considered a failure mode of a thruster system?
  • What will typically trigger a DP system alert regarding heading error?
  • Which of the following items are part of the main elements of a DP system?
  • What real-time force is used in the DP mathematical model?
  • In a DP Class 2 or 3 vessel with four Position Reference Systems, why should the DPO consider the two DGNSS as just one PRS?
  • In a DP system, which hardware component is responsible for displaying operational information to the DPO?
  • Which of the following degrees of freedom for a ship's movement are controlled by the DP system?
  • In the context of fault-tolerant design, what does 'protection' signify?
  • What determines the amount of thruster force used while operating in joystick mode?
  • When a thruster system fails, what is the expected result regarding thrust?
  • In DP operations, what effect does increasing wind speed have on required thrust, based on the thrust formula?
  • Which thruster design is more efficient when both thrusters have the same power rating and propeller diameter?
  • Which factor is critical in determining the positioning accuracy of a DP system?
  • When both thrusters have the same power rating, which generates more thrust at a bollard pull condition?
  • Which best describes TCP/IP?
  • What is a Capability Diagram?
  • Which design feature of a thruster can enhance its operational efficiency?
  • What happens in a common-mode failure scenario within DGNSS systems?
  • What should a DP operator do if there is a "heading difference error" between two selected Gyro Compasses?
  • What should safe working limits consider for dynamic positioning operations?
  • What happens to Class 2 Dynamic Positioning operations if one azimuth thruster is out of service?
  • What is the responsibility of IP within TCP/IP?
  • What is the main purpose of conducting a risk assessment in the Management of Change process?
  • What sensor's forces are factored out when determining the environmental forces acting on a DP vessel?
  • What does the DP System use to calculate weighting for each Position Reference System?
  • In a Dynamic Positioning system, what is the primary function of the sensors?
  • Which aspect is essential for ensuring effective DP operations?
  • What indicates the necessity of conducting repeating DP location set-up checks?
  • What is a key benefit of having a dynamic positioning (DP) system on board a vessel?
  • How does the DP system respond to external forces such as waves?
  • Which environmental factor affects the reception of GNSS satellite data?
  • Which DP system configuration is most effective for maintaining stability in low environmental conditions?
  • Which document should a DP operator review to understand the consequences of failure in a redundant part of a DP system?
  • What is the purpose of the "Wind feed forward" facility?
  • What outcome can occur due to thrust failures in dynamic positioning?
  • When operating in dynamic positioning, which factor is least likely to directly affect thruster performance?
  • Which factor is NOT damaging to acoustic reception?
  • What is one potential consequence of thruster modulation?
  • In case of an emergency, what should crew members prioritize aboard a DP vessel?
  • What is a vessel model?
  • When is a DP system considered to have 'redundancy'?
  • According to IMO MSC/Circ. 654 of 1994, how long should an Uninterruptible Power Supply UPS battery system power the DP computer system after a mains failure?
  • What is one of the primary considerations when planning a DP operation near a fixed structure?
  • If wind sensors are blocked by the topside of a platform, what should the DP operator do?
  • What does DARPS stand for?
  • What is a key advantage of a Controlled Pitch Propeller system?
  • Which degrees of freedom are controlled in a DP control system?
  • The thrust produced by a fixed pitch variable speed thruster is roughly proportional to what factor?
  • In the context of risk assessments, what should come after identifying potential hazards?
  • How many zones are there in the Universal Transverse Mercator (UTM) system?
  • What can contribute to wind model inaccuracies in DP operations?
  • How is ultrashort baseline acoustic position determined?
  • What is the intended design of operator controls on equipment class 2 and 3 vessels?
  • What is the point about which a DP vessel rotates when changing heading?
  • What is the principle behind Model control or Dead Reckoning mode in DP systems?
  • When is it advisable to deactivate the wind sensor on a DP system?
  • Between two thrusters at different depths, which one is expected to be more prone to cavitation when both generate the same thrust?
  • What is the purpose of IMCA Industry Guidance?
  • What is the recommended practice when conducting risk assessments related to DP operations?
  • What advantage does a DP system have over traditional anchoring?
  • What is characteristic of a fixed pitch variable speed thruster?
  • What phenomenon occurs as a spin-off from the Gulf Stream?
  • What does FMEA stand for with respect to a DP vessel?
  • Which Position Reference System provides a DP system with global positioning coordinates?
  • To effectively manage changes in system operation, what should be considered?
  • What is the recommended mix of position reference systems for a DP Class 3 dive support vessel operating at a depth of 200m?
  • What should a DPO do immediately if a non-connected thruster fails to full force?
  • What could be a consequence of failing to implement appropriate elevation masks?
  • How often should FMEA be reviewed for DP systems?
  • Which thruster configuration would produce the most thrust?
  • When a PSV is in Follow Target Mode, what is the best combination of Position Reference Sensors for following a Semi-Submersible?
  • What is a benefit of establishing different elevation masks for DGPS systems?
  • What typically happens when a thrust failure occurs in a DP system without RPM feedback?
  • What is one of the main functions of the Power Management System in a DP setup?
  • What is the initial effect on positioning ability if a thruster commanded at 45% begins showing 20% feedback?
  • What is the main purpose of redundancy in a DP system?
  • How does a controllable pitch propeller work?
  • What is the recommended duration for retaining DP fault logs on board?
  • Which position reference system mix is suitable for lifting activities in proximity to other offshore structures in greater than 350m depth?
  • In the event of total power loss on a Class 1 vessel's DP console while in Auto DP, how can the DPO regain control of the vessel's thrusters?
  • What is the key advantage of implementing a triple redundant DP system?
  • How many Global Positioning Satellites are required to ascertain a fix position at sea?
  • The online Consequence Analysis function is primarily used to verify what?
  • If a thruster that has been running for hours at 45% shows a drop to 20% feedback, what will happen to positioning ability?
  • Which of the following is a characteristic of a mathematical model in DP systems?
  • For DP Class 2 and 3 operations, why should at least three Position Reference Systems not be based on the same principle?
  • The function of a DP system's redundancy includes which critical aspect for nautical operations?
  • What is a data timeout?
  • How does the DP system respond to corrected errors in thrust performance?
  • What thrust would be required to hold position against a 60-knot wind based on a known thrust of 12,000 pounds at 10 knots?
  • What negatively affects sound propagation in water when using an Hydroacoustic Position Reference (HPR) system?
  • What should the DPO's first action be if a bow tunnel thruster fails to full force during DP operation on a Class 2 vessel?
  • What does a vessel model represent in the context of DP systems?
  • What does the number "207.123.123.001" represent in the context of a dynamic positioning system?
  • What is one disadvantage of a ship using its DP system compared to being anchored?
  • What is the main purpose of Dynamic Positioning?
  • Which element is essential for capturing positional data for DP systems while on the move?
  • In which mode does the high precision positioning (HPR) system measure only ranges?
  • What is the key role of the DP Operator Station in dynamic positioning?
  • What type of interference is likely when operating close to another dynamic positioning (DP) vessel?
  • What is the most likely reason a DC thruster at 45% command shows only 20% feedback?
  • What might best help DP performance in a power limit situation?
  • What is the significance of a power factor in relation to DC thruster motors?
  • What document is vital for assessing the impact of equipment failures on DP operations?
  • What additional factor should be considered in the development of DP capability plots along with environment, thrust availability, and hull form?
  • What method is used to determine short baseline acoustic position?
  • What measure can prevent loss of position and/or heading if a DP system component fails?
  • Why does a DP equipment class 2 vessel require at least 3 gyros?
  • What should be a component of the risk assessment when proposing changes to systems or equipment?
  • What influences the amount of thruster force required in auto-positioning mode?
  • How can redundancy for vessel heading input be achieved?
  • What is a key reason for having at least three different types of Position Reference Systems in DP operations?
  • What is a vessel model?
  • How does TCP/IP handle lost data?
  • Which component is considered the most essential part of a Dynamic Positioning system?
  • At full rated thrust, how much thrust does a fixed pitch variable speed thruster produce per shaft horsepower?
  • Who is generally responsible for authoring Activity Specific Operating Guidance (ASOG)?
  • How does Ethernet handle collisions?
  • What is preferential tripping?
  • On Equipment Class 3 vessels, to what should one of each type of sensor be connected?
  • Which statement is most true regarding a controllable pitch fixed RPM thruster?
  • What happens to thrust at half rated thrust compared to full rated thrust?
  • What is the user interface element for the DPO in a DP system?
  • In DP operations, which aspect significantly contributes to the stability of thruster output?
  • Which of the following systems is primarily used to monitor the pitch of a vessel?
  • What natural phenomenon does NOT hinder underwater acoustic transmission?
  • What is the effect of a wider blade on a thruster compared to a narrower blade of the same power rating and diameter?
  • Which system utilizes a single transducer along with an array of transponders on the seabed?
  • How is a DP control system protected against main power failure or fluctuations?
  • What is the function of the multiple transponders used in long baseline positioning?
  • What function does Thruster Allocation Logic serve in a DP system?
  • What is not affected when positioning using a Fanbeam reference system?
  • Which of the following describes a system that maintains position with the capability of continuing after a single point failure?
  • Which position reference system combination is appropriate for pipe laying activities in less than 350m depth?
  • What is the fastest method to troubleshoot a thruster showing reduced feedback?
  • Which documentation is typically used to develop Activity Specific Operating Guidance (ASOG)?
  • What course of action should be taken in the event that any configurations change in equipment setup such as UPS supplies?
  • What is one consequence of failure in the Power Management System during DP operations?
  • What kind of vessel typically operates with a DP system?
  • Does Ethernet ensure all data gets through securely?
  • When using a Hydroacoustic Position Reference (HPR) system, what environmental factor does not adversely affect acoustic reception?
  • If a heading difference error occurs between two selected Gyro Compasses in a DP system, what should the DPO do?
  • In the context of ASOG, who ideally possesses the relevant knowledge to craft these guidelines?
  • What is the single most effective way to prevent a loss of redundancy that may result in a vessel being unable to complete its mission?
  • Which type of system relies on acoustic signals for positioning?
  • When the DP system is set to 'Auto Position' mode, what primary function does it perform?
  • When using a Taut Wire positioning system, what is a significant factor?
  • How long should records of DP familiarization and competency be maintained on board?
  • What is the function of the Motion Reference Unit?
  • What is the minimum number of thrusters required for a DP Class 2 vessel?
  • In DP operations, why is it crucial to maintain vessel heading control?
  • What is the function of a DP Operator during a system failure?
  • What input is necessary for automatic control of surge or sway movements on a DP system?
  • What role does the power supply play in a dynamic positioning system?
  • What is the purpose of the formal Management of Change process?
  • At what load do DC thruster drives exhibit their best power factor?
  • In a DP control system, how are the controlled degrees of freedom managed?
  • Can a DP Operator set up DC thrusters to improve the power plant's power factor?
  • How should vessels constructed prior to June 9, 2017, be treated regarding their dynamic positioning systems?
  • What happens when the electrical power demand from the thruster exceeds a set percentage of the online generating capacity?
  • What do the term "collisions" refer to in Ethernet networks?
  • Why are different elevation masks recommended for multiple DGPS units in operation?
  • How does wind feed forward function in DP operations?
  • What is crucial for maintaining a DP vessel's position during a heading change?
  • How does the installation of multiple systems contribute to dynamic positioning safety?
  • How is the DP current determined?
  • What is the purpose of a Vertical Reference Sensor in a DP system?
  • What is a critical aspect of designing DP systems regarding fault tolerance?
  • Which mode of thruster operation is often indicative of maximum thrust performance?
  • How is Time to Terminate (TTT) defined in DP operations?
  • In Auto Position mode for DP operations, how much settling time should normally be allowed prior to commencing work?
  • If a platform has just one Artemis antenna, how many vessels can it position using Artemis?
  • What is the function that maintains thruster output settings during a severe system failure?
  • To increase thrust with a Fixed Pitch Propeller, what should be done?
  • If both thrusters operate at the same depth and thrust, what is the expected difference in efficiency between them?
  • The thrusters on a DP vessel are responsible for controlling which of the following?
  • What actions should the DPO take if a "Self-Test Error - DP Controller 'A'" alarm is generated on the DP Operating Station?
  • What measurement is commonly taken to assist in underwater navigation?
  • What type of address does IP use for forwarding packets?
  • Which method is utilized by classification societies to assess fault tolerance within DP systems?
  • For Equipment Class 3 vessels, at least one position reference sensor should be directly connected to which system?
  • Under what potential scenario should DP capability plots be recalculated?
  • What is a critical aspect of using multiple DGPS units together?
  • What should be noted regarding the operational limits of a DP vessel with reduced thruster capability?
  • Which of the following is a key component of the DP system?
  • What major factor negatively affects sound propagation in water when using an Acoustic Position Reference system?
  • On a Class 2 vessel with two boards, what should be done in the event of a blackout on one side?
  • When making a move under DP control, what is the recommended speed and reason for it?
  • When does the total amount of thruster force needed to maintain station vary?
  • What is a hidden failure?
  • What is a characteristic of a DP Class 1 vessel?
  • What does the DARPS Position Reference System allow a shuttle-tanker to do?
  • What is the primary goal of DP control systems in maritime operations?
  • Which of the following is NOT considered a 'Local' Position Reference System?
  • What is the significance of the FMEA in determining safe working limits?
  • Why is the involvement of the field owner/operator crucial in developing ASOG?
  • Which component is the user interface for the DPO in a DP system?
  • Which of the following degrees of freedom can be controlled by a Dynamic Positioning system and is not influenced by a position reference system?
  • According to IMO Recommendations, how many Position Reference Systems should be available and online during a Class 2 operation?
  • What is required to effectively manage DP vessel reliability?
  • Which component is part of the critical checks during DP location set-up?
  • What is a drift test?
  • Which fixed pitch thruster configuration would produce the least noise effects on the acoustic position reference system?
  • Which of the following functions is inherent in a DP system?
  • When are DP mobilisation trials required to take place?
  • What is the typical response of a DP vessel when one of its reference systems fails?
  • What is a thruster exclusion zone?
  • What is the primary purpose of redundancy in DP systems?
  • In fog conditions at a range of 100m, which position reference system is not usable?
  • During DP operations, for a vessel working to Class 2 requirements, which factor is expected not to increase excursion?
  • How should proposed changes to systems or equipment be managed according to DP FMEA?
  • What should the initial survey of equipment class 2 and 3 DP vessels include?
  • What is the primary function of a Fanbeam system within a DP context?
  • From where is Sway data primarily derived on a DP vessel?
  • What is the purpose of implementing multiple sensors in a dynamic positioning system?
  • In which DP vessel Equipment Class may loss of position occur due to a single fault?
  • What does the surge movement refer to in maritime operations?
  • What is a critical factor in determining vessel operational safety in DP operations?
  • What equipment should be located at the DP control station?
  • To which vessels does Section 4 of IMO MSC 1580 Guidelines apply?
  • What is essential to achieve during successful DP mobilisation trials?
  • What is the definition of a DP mode where a vessel maintains position relative to a moving surface installation?
  • What type of vessel class allows for multiple redundant systems to be installed?
  • At full power, in which condition does a thruster propeller generate the most thrust?
  • Approximately how many Global Positioning Satellites are above the horizon at any given time?
  • What does the dynamic positioning system rely on for its operation?
  • Which system is typically used for underwater positioning?
  • What is a network?
  • What impact do fixed speed, variable pitch propellers have at low thrust?
  • Cumulus cloud thunderstorms can generate surface winds in excess of what speed?
  • What highlights the importance of comparing Gyro readings with the Magnetic Compass?
  • If a thruster drive fails to 50% output while pushing the vessel to starboard, what is the initial effect?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy